Pool Open

• Pump off water from top of cover (If necessary)
• Remove winter cover
• Lightly wash winter cover
• Fold and put away winter cover
• Lightly wash water bags (If Required)
• Lightly wash pool deck
• Install steps - check condition
• Remove winter plugs & gizmo
• Install pool jets and skimmer basket.
• Install pool light(s)
• Install heater flow switch *note below
• Install Salt Cell if salt water pool
• Install filter drain plug & site glass
• Set filter valve for summer use – Sand Filter
• Install filter cartridges - Cartridge Filter
• Install pump drain plugs and basket
• Prime and run pump – inspect and check operation of equipment Image uses a tool to allow pump to operate if level is low - no return trip necessary
• Add opening chemicals to pool

Note:  Technicians opening the pool will not turn on gas valves, start heaters or light heater pilots. This can be arranged with our licensed gas technician at an extra cost.